China Current transformer copper material Manufacturers, Suppliers, Factory

LMZC-10 Current Transformer - Accurate and Reliable Solution for Current Monitoring and Protection in Power Systems The LMZC-10 Current Transformer is an exceptional device designed for precise and reliable current measurement in AC circuits. Its innovative design and advanced technology make it an ideal choice for accurate current monitoring and protection in various power systems. At the heart of the LMZC-10 is a primary coil and a secondary coil. The primary coil consists of a specific number of turns and is connected within the measurement circuit. When an AC current flows through the primary coil, it generates an alternating magnetic field around it. This magnetic field, in turn, induces an electromotive force within the secondary coil. The secondary coil is wound around the primary coil, with fewer turns than the primary coil, to ensure proportional voltage output. To maintain a stable voltage output within an appropriate range, the LMZC-10 is equipped with a compensating coil. The compensating coil has the same number of turns as the secondary coil but with a reversed winding direction. This ingenious design ensures that the induced potential in the compensating coil counteracts the induced potential in the secondary coil, resulting in a stable and accurate output voltage. The output voltage from the secondary coil is then connected to a load circuit, which generates a voltage signal proportional to the current in the primary coil. By measuring this output voltage, the magnitude of the current in the primary coil can be accurately determined. This makes the LMZC-10 an invaluable tool for current monitoring and protection in power systems. The LMZC-10 Current Transformer offers numerous advantages. Its precise measurements provide accurate data for load management and fault analysis, allowing operators to make informed decisions regarding the power system. As a key component in electrical protection systems, the LMZC-10 ensures the safety and reliability of the entire system by enabling quick and accurate detection of abnormal currents or faults. In conclusion, the LMZC-10 Current Transformer offers a reliable and accurate solution for current measurement in AC circuits. Its primary and secondary coils, along with the compensating coil, work in harmony to provide stable voltage output and precise current measurements. With its advanced features and exceptional performance, the LMZC-10 is widely used in power systems for current monitoring and protection applications. Trust the LMZC-10 to deliver accurate and reliable results for your current measurement needs, ensuring the efficiency and safety of your electrical systems.

the SHF1-Q-L Low-Voltage Cable Tap Box, a high-quality and versatile solution for outdoor engineering projects. Made with SMC composite materials and molded at high temperatures, this tap box offers a wide range of advantages, from exceptional durability to convenient installation. With excellent impact resistance, bending strength, and aging resistance, the SHF1-Q-L tap box is designed to withstand harsh environmental conditions. It can effectively resist abrasion, corrosion, and the detrimental effects of exposure to various elements. Whether you are working in challenging outdoor environments or dealing with demanding conditions, this tap box is built to withstand it all. The SHF1-Q-L Low-Voltage Cable Tap Box is compatible with a variety of electrical components, including knife fuse switches, plastic case breakers, bar switches, and bus systems. It is suitable for power transmission and distribution in public places such as urban and rural power grid renovations, municipal projects, residential areas, and high-rise buildings. Additionally, it excels in controlling and protecting cable thousand type distribution and branch lines. One of its standout features is the compact and exquisite exterior structure that meets the requirements for creepage distance. The box is designed to be visually appealing while maintaining a small size and lightweight construction. This ensures easy installation and integration into existing electrical systems. Furthermore, the box body offers high insulation resistance and power frequency dielectric strength. As the outer shell of electrical equipment, it provides a high level of safety, making it the preferred choice for power grid renovations. The SHF1-Q-L Low-Voltage Cable Tap Box boasts remarkable corrosion resistance, allowing it to withstand exposure to dilute concentrations of acids, alkalis, and salts. It also exhibits strong resistance to various oils, organic solvents, and even seawater. This level of durability ensures reliability in diverse environments, increasing the longevity of your electrical systems. Thanks to its exceptional anti-aging performance, the SHF1-Q-L Low-Voltage Cable Tap Box has a service life of over 30 years. Its impact resistance and machinability guarantee that it will not be easily damaged, providing continuous protection for the electrical components it houses. Additionally, the insulation of this tap box does not require grounding, simplifying the installation process and saving significant manpower and material resources. Inside the box, you'll find a dedicated insulation bracket that adds extra support for your equipment. The box is equipped with a dedicated lock for the door, ensuring the security of your electrical system. Furthermore, for added convenience, it comes with a second padlock for improved safety measures. Choose the SHF1-Q-L Low-Voltage Cable Tap Box for its superior features, durability, and convenient installation. With its exceptional resistance to impact, corrosion, and aging, this tap box offers long-lasting protection for your electrical systems. Experience the ease of installation and the peace of mind that comes with this reliable product. Place your order today and witness the advantages it brings to your outdoor engineering projects.

Introducing the KYN28-12 Medium Voltage Metal-Clad Switchgear: the perfect solution for all your electrical distribution needs. This cutting-edge product combines reliability, safety, and efficiency, making it a must-have for any industrial facility. As a medium voltage switchgear, the KYN28-12 is designed to operate efficiently at a voltage of 12KV, ensuring a smooth and stable flow of electricity throughout your power system. Its advanced technology guarantees reliable performance, minimizing downtime and maximizing productivity. With the KYN28-12 switchgear, safety is our top priority. Equipped with state-of-the-art protection mechanisms, including circuit breakers and ground fault protection, this switchgear ensures the safety of both your equipment and personnel. It is designed to withstand harsh environments, offering superior insulation and protection against electrical faults. This versatile switchgear is specially designed for industrial applications. Its compact and modular design allows for easy installation, reducing construction time and costs. The switchgear panel is user-friendly, featuring intuitive controls and indicators for effortless operation and maintenance. The KYN28-12 switchgear is not only reliable and safe but also highly efficient. Its intelligent design minimizes energy loss, saving you money on electricity bills. It also enables remote monitoring and control, providing real-time information for easy troubleshooting and preventive maintenance. As a seller, we understand that customer satisfaction is paramount. That is why we offer comprehensive after-sales support, including installation assistance, technical training, and prompt troubleshooting services. Our team of experts is always ready to assist you in optimizing the performance of your electrical system. In conclusion, the KYN28-12 Medium Voltage Metal-Clad Switchgear is the ideal choice for efficient, reliable, and safe electrical distribution. With its advanced features, user-friendly design, and stellar performance, it is the ultimate solution for any industrial facility. Invest in the KYN28-12 switchgear and experience the power of innovation and efficiency in your electrical system

The ZW32-12 outdoor high voltage vacuum circuit breaker with disconnector is a state-of-the-art electrical equipment specifically designed for outdoor high voltage distribution systems with a rated voltage of 12kV and three-phase AC 50Hz. It is primarily used for the interruption and closure of current loads, overload currents, and short circuit currents in power systems. It finds extensive application in substations, industrial and mining enterprises' power distribution systems for protection and control purposes, as well as in urban and rural electrification projects, where frequent operations are required. The ZW32 vacuum circuit breaker is equipped with a spring-stored energy operating mechanism, allowing for manual, electric, and remote tripping and closing operations. Additionally, a disconnecting switch can be installed on the side of the circuit breaker, forming a combination of an outdoor high voltage vacuum circuit breaker and an outdoor high voltage disconnector. This configuration enhances visible isolation and ensures reliable interlocking operations. Moreover, based on user requirements, the ZW32 series can be paired with corresponding controllers to create an AC high voltage vacuum automatic recloser or an automatic sectionalizer, which are self-powered, making it an ideal device for achieving automation in power distribution networks. The ZW32-12G/1250-20 belongs to the ZW32-12 series of column-type outdoor high voltage vacuum circuit breakers. It is perfectly suited for interrupting and closing load currents, overload currents, and short circuit currents in urban or rural power distribution systems with a rated voltage of 12kV and three-phase AC 50Hz. The circuit breaker features a completely new compact design with a fully enclosed structure and unique arc extinguishing chamber sealing technology, ensuring excellent sealing performance and protection against moisture and condensation. Thus, it is well-suited for use in high-temperature and humid areas. The ZW32-12G circuit breaker disconnector combination is comprised of two major parts: the ZW32 circuit breaker and the disconnector. This configuration provides a comprehensive solution for efficient and reliable power distribution. The high voltage potential transformer structure can be externally or integrally mounted, catering to different installation requirements. Overall, the ZW32-12 outdoor high voltage vacuum circuit breaker with disconnector is a highly advanced and reliable electrical device that fulfills the diverse needs of outdoor high voltage distribution systems. Its compact design, excellent sealing, and flexible configuration options make it an ideal choice for various applications, contributing to the automation and improvement of power distribution networks.

the GW4 Series High Voltage Outdoor Disconnect Switch, a state-of-the-art solution for providing safe and reliable disconnection of high voltage power systems. Designed and manufactured with the utmost precision and cutting-edge technology, this switch offers unparalleled performance and efficiency. The GW4 Series is engineered to meet the demanding requirements of outdoor high voltage applications, making it the ideal choice for utilities, industrial plants, and commercial installations. It boasts an impressive range of features to ensure optimum performance and user safety. One of the key highlights of the GW4 Series is its robust construction. Manufactured using high-quality materials, this disconnect switch is built to withstand extreme weather conditions, harsh environments, and heavy-duty usage. The sturdy design ensures long-term reliability and durability, minimizing maintenance and replacement costs. the GW4 Series offers a wide range of applications. Whether it's a distribution network, transmission line, or industrial power system, this disconnect switch can handle various voltage levels with ease, ensuring seamless operations. Additionally, the GW4 Series is equipped with advanced safety features. The switch is designed to provide a complete isolation of the power system, minimizing the risk of electrical accidents during maintenance and repairs. The interlock mechanism ensures that the switch can only be opened or closed under specific conditions, further enhancing operator safety. Installation and maintenance of the GW4 Series disconnect switch are hassle-free. The switch is compact and lightweight, allowing for easy transportation and installation. Furthermore, it requires minimal maintenance, resulting in reduced downtime and increased operational efficiency. In conclusion, the GW4 Series High Voltage Outdoor Disconnect Switch is a reliable and efficient solution that guarantees the safe disconnection of high voltage power systems. With its robust construction, versatile applications, advanced safety features, and user-friendly design, this switch is undoubtedly the perfect choice for any high voltage outdoor disconnection requirement. Upgrade to the GW4 Series today and experience unparalleled performance and reliability.

The ZW20-12 outdoor column intelligent vacuum electrical circuit breaker is a cutting-edge product designed to meet the demands of modern power distribution systems. With its reliable fault detection, protection control, and communication capabilities, this circuit breaker ensures the efficient and safe operation of power networks. Equipped with advanced features, such as precise detection of milliamp-level zero-sequence current and phase-to-phase short-circuit fault currents within and outside the range, it provides automatic disconnection for single-phase ground faults and phase-to-phase short-circuits. Key Features: Fault Detection Function: The ZW20-12 circuit breaker is equipped with a fault detection function, which allows for the reliable identification and diagnosis of faults in the power distribution system. This feature enables prompt action to be taken to restore power and minimize downtime. Protection Control Function: The circuit breaker incorporates a comprehensive protection control function, which ensures the safety and integrity of the power distribution network. It effectively responds to abnormal conditions, such as overcurrent, overvoltage, and short-circuit faults, protecting the network from damage and preventing potential hazards. Communication Function: With its communication capabilities, the ZW20-12 circuit breaker enables seamless integration into the power distribution automation system. It supports various communication protocols, facilitating real-time monitoring, data collection, and control of the circuit breaker's operation. This function enhances the efficiency and reliability of the power distribution system. Milliamp-Level Zero-Sequence Current Detection: The circuit breaker is capable of accurately detecting milliamp-level zero-sequence currents, both within and outside the specified range. This feature allows for the identification and isolation of single-phase ground faults, ensuring continuous power supply and preventing further damage to the system. Phase-to-Phase Short-Circuit Fault Current Detection: The ZW20-12 circuit breaker efficiently detects phase-to-phase short-circuit fault currents, providing immediate disconnection to isolate the fault and protect the power distribution system. The rapid response and precise detection capability minimize the impact of short-circuit faults on the network. In conclusion, the ZW20-12 outdoor column intelligent vacuum electrical circuit breaker incorporates advanced functionalities, including fault detection, protection control, and communication capabilities. With its precise detection of milliamp-level zero-sequence currents and phase-to-phase short-circuit fault currents, it enables automatic disconnection of single-phase ground faults and phase-to-phase short circuits. This circuit breaker ensures the safety, reliability, and efficient operation of power distribution systems, contributing to uninterrupted power supply and minimizing downtime in the event of faults.