China Vacuum switch Manufacturers, Suppliers, Factory

The FKN12A-12 series high voltage indoor load break switch is a three-phase high voltage switch equipment with a rated voltage of 12kV and a rated frequency of 50Hz. It is specifically designed for handling load currents, loop currents, no-load transformer and cable charging currents, as well as closing short-circuit currents. This load break switch is equipped with a grounding switch, capable of withstanding short-circuit currents. It is conveniently fitted with both manual and motor operating mechanisms, allowing for easy implementation of the three remote control requirements in power systems.

XL-21 floor-type low voltage power distribution switchgear: As a power supply system with AC 50Hz-60Hz, rated working voltage 380-400V, rated working current up to 630A, and breaking capacity up to 15kA, It provides power conversion, distribution and control for power distribution equipment such as power, lighting and fans. Can provide overload, short circuit and leakage protection. It  contain 2 Two installation structure :Indoor box structure (protection grade IP30),Outdoor box structure (protection grade IP65).Easy to install, economical and practical It is suitable for power users such as power plants, substations, industrial and mining enterprises, and highway tunnels.

Introducing the ZN28-12 series indoor high-voltage vacuum circuit breaker, a cutting-edge solution designed to optimize electrical performance and ensure efficient power distribution. This circuit breaker is equipped with a middle-sealed longitudinal magnetic field vacuum arc extinguisher and a new operating mechanism, guaranteeing reliable and safe operations. The operating mechanism and the vacuum arc extinguishing chamber adopt a front and rear layout, providing enhanced control and functionality. By connecting the operating mechanism to the movable conductive rod of the vacuum arc-extinguishing chamber through an insulating pull rod, it drives the movable contacts of the chamber to execute seamless opening and closing movements according to specified mechanical parameters. This precise movement enables the breaker to effectively break short-circuit currents and improves the mechanical life of the arc extinguishing chamber. To further enhance the circuit breaker's performance during operation, an auxiliary guide device is installed on the upper bracket of the fixed arc extinguishing chamber. This device ensures that the moving contacts remain well aligned during the opening and closing process, preventing any potential disruptions and enhancing the overall efficiency of the breaker. This innovation not only improves the short-circuit current breaking capability but also extends the lifespan of the arc extinguishing chamber. One of the key features of this series is the centrally enclosed longitudinal magnetic field vacuum arc extinguishing chamber. When the moving and static contacts open under load, the vacuum arc burns in the contact gap. However, the arc is swiftly extinguished when it crosses zero. The special structure of the contact generates a significant longitudinal magnetic field during arcing. This magnetic field evenly distributes the arc on the contact surface, resulting in a low arc voltage. Through this innovative design, the circuit breaker achieves a high arc voltage dielectric strength recovery speed. This unique characteristic significantly reduces the arc energy and electrical corrosion rate, ultimately improving the short-circuit current breaking capability and enhancing the overall lifespan of the circuit breaker. The ZN28-12 series indoor high-voltage vacuum circuit breaker is a reliable and efficient solution for various electrical systems. With its advanced features and superior performance, it plays a vital role in maintaining the stability and safety of power distribution networks. Trust in the ZN28-12 series to deliver exceptional results for your electrical needs.

Introducing our latest product, an advanced electrical system with outstanding performance and reliability. Designed for high voltage applications, it is built to meet demanding requirements and ensure uninterrupted power supply. With a rated voltage of 35KV, this product is capable of handling heavy loads efficiently. Its rated current of 630A enables it to deliver precise power distribution while maintaining optimal performance. In cases of sudden surges or faults, the system can handle dynamic currents of up to 50KA for 0.3 seconds, guaranteeing fast and effective protection. The thermal stable current of 20KA for 3 seconds ensures stable operation even under continuous high current conditions. To withstand power frequency variations, the system offers excellent 1-minute power frequency tolerance of up to 80KV. This feature guarantees the stability and reliability of the electrical network, reducing the risk of disruptions. Featuring a DC voltage withstand for 15 minutes of 125KV, the product showcases exceptional insulation capabilities. This attribute is particularly crucial in environments with high-voltage DC components, rendering it suitable for a wide range of applications. Additionally, our system's lightning shock withstand voltage of 185KV provides enhanced protection during electrical storms, safeguarding the entire electrical network from potential damage. The product's box protection class of IP33 offers reliable protection against solid objects greater than 2.5mm in diameter, preventing dust ingress and moisture penetration. This feature ensures the durability and longevity of the system even in harsh environments. In conclusion, our advanced electrical system is a reliable and efficient solution for high voltage applications. With its exceptional performance, robust build quality, and superior protection features, it guarantees uninterrupted power supply and peace of mind.

The ZW20-12 outdoor column intelligent vacuum electrical circuit breaker is a cutting-edge product designed to meet the demands of modern power distribution systems. With its reliable fault detection, protection control, and communication capabilities, this circuit breaker ensures the efficient and safe operation of power networks. Equipped with advanced features, such as precise detection of milliamp-level zero-sequence current and phase-to-phase short-circuit fault currents within and outside the range, it provides automatic disconnection for single-phase ground faults and phase-to-phase short-circuits. Key Features: Fault Detection Function: The ZW20-12 circuit breaker is equipped with a fault detection function, which allows for the reliable identification and diagnosis of faults in the power distribution system. This feature enables prompt action to be taken to restore power and minimize downtime. Protection Control Function: The circuit breaker incorporates a comprehensive protection control function, which ensures the safety and integrity of the power distribution network. It effectively responds to abnormal conditions, such as overcurrent, overvoltage, and short-circuit faults, protecting the network from damage and preventing potential hazards. Communication Function: With its communication capabilities, the ZW20-12 circuit breaker enables seamless integration into the power distribution automation system. It supports various communication protocols, facilitating real-time monitoring, data collection, and control of the circuit breaker's operation. This function enhances the efficiency and reliability of the power distribution system. Milliamp-Level Zero-Sequence Current Detection: The circuit breaker is capable of accurately detecting milliamp-level zero-sequence currents, both within and outside the specified range. This feature allows for the identification and isolation of single-phase ground faults, ensuring continuous power supply and preventing further damage to the system. Phase-to-Phase Short-Circuit Fault Current Detection: The ZW20-12 circuit breaker efficiently detects phase-to-phase short-circuit fault currents, providing immediate disconnection to isolate the fault and protect the power distribution system. The rapid response and precise detection capability minimize the impact of short-circuit faults on the network. In conclusion, the ZW20-12 outdoor column intelligent vacuum electrical circuit breaker incorporates advanced functionalities, including fault detection, protection control, and communication capabilities. With its precise detection of milliamp-level zero-sequence currents and phase-to-phase short-circuit fault currents, it enables automatic disconnection of single-phase ground faults and phase-to-phase short circuits. This circuit breaker ensures the safety, reliability, and efficient operation of power distribution systems, contributing to uninterrupted power supply and minimizing downtime in the event of faults.

The GGD low voltage electrical complete switchgear panel for substations is a high-quality product designed for efficient and reliable power distribution in various substation applications. As a seller, we take pride in offering this advanced switchgear panel that meets the highest industry standards and provides a comprehensive solution for low voltage electrical control and protection. Features Robust Construction: The GGD switchgear panel is built with a sturdy and durable framework to withstand the harshest working conditions. Its rigid structure ensures longevity and stable performance. Enhanced Safety: Safety is a top priority in any electrical system. The GGD switchgear panel is equipped with advanced protective features, such as fault indicators, overload protection, and short circuit protection to ensure the safety of both personnel and equipment. Flexible Component Configuration: The GGD switchgear panel offers versatile configuration options to suit specific substation requirements. It can accommodate various components, including circuit breakers, disconnectors, and transformers. This flexibility allows for easy customization and integration into existing systems. User-friendly Interface: The GGD switchgear panel features a user-friendly interface, making operation and maintenance hassle-free. Its intuitive design ensures ease of use, reducing the need for extensive training and minimizing downtime. Efficient Power Distribution: The GGD switchgear panel ensures efficient power distribution by effectively managing electrical loads and preventing power surges or fluctuations. This enhances the overall performance and reliability of the substation. Remote Monitoring and Control: With the GGD switchgear panel, users can remotely monitor and control the electrical system through advanced communication capabilities. This feature facilitates real-time status updates, alarm notifications, and allows for proactive maintenance, leading to improved system efficiency. Compliance with International Standards: The GGD switchgear panel adheres to international standards such as IEC IEC60439.1 and GB7251.1, ensuring compatibility and reliability with other electrical systems worldwide. This compliance further guarantees the performance and safety of the product. Applications The GGD low voltage electrical complete switchgear panel for substations is suitable for a wide range of applications, including power plants, oil and gas facilities, industrial complexes, commercial buildings, and renewable energy projects. Its versatility and reliability make it an ideal choice for any low voltage electrical distribution system. Conclusion As a trusted seller, we offer the GGD low voltage electrical complete switchgear panel for substations, a high-quality product that combines durability, safety, efficiency, and flexibility. With its advanced features and user-friendly interface, this switchgear panel ensures reliable power distribution in various applications. Choose the GGD switchgear panel for your substation needs, and experience the difference in performance and reliability.